水工瀝青混凝土試驗規程內容簡介

《DL/T 5362—2006 水工瀝青混凝土試驗規程(英文版)》是由中國電力出版社出版的。

Foreword

1 Scope

2 Normative References

3 Terms and Definitions

4 General

5 Bitumen

5.1 Sampling

5.2 Preparation

5.3 Density Test

5.4 Penetration Test

5.5 Ductility Test

5.6 Softening Point Test （Ring-and-baU Apparatus）

5.7 Solubility Test

5.8 Thin-film Oven Test

5.9 Flash Point and Fire Point Test （Cleveland Open Cup Method）

5.10 Breaking Point Test （Fraass Method）

5.11 Moisture Content Test

5.12 Test of Bitumen Paraffin Content （Distillation Test）

5.13 Residue Content Test of Emulsified Bitumen by Evaporation

5.14 Ionic Particle Charge Test of Emulsified Bitumen

5.15 Adhesion Test of Emulsified Bitumen and Aggregate

5.16 Storage Stability Test of Emulsified Bitumen

5.17 Demulsibility Test of Emulsified Bitumen

6 Filler

6.1 Filler Sampling

6.2 Sieve Analysis of Filler

6.3 Density Test of Filler

6.4 Moisture Content Test of Filler

6.5 Hydrophilic Coefficient Test of Filler

7 Fine Aggregate

7.1 Gradation Test

7.2 Apparent Density and Absorption Test

7.3 Moisture Content Test

7.4 Mud Content Test

7.5 Soundness Test （Sodium Sulfate Method）

7.6 Soundness Test （Crushing Method）

7.7 Organic Impurities Content Test

7.8 Water Stability Test

8 Coarse Aggregate

8.1 Grain Grading Test

8.2 Apparent Density and Water Absorption Test

8.3 Moisture Content Test

8.4 Mud Content Test

8.5 Clay Lump Content Test

8.6 Elongated and Flat Grain Content Test

8.7 Crush Ratio Test

8.8 Soundness Test

8.9 Adhesion Test of Coarse Aggregate and Bitumen

8.10 Alkalinity Test of Aggregate

9 Bitumen Concrete

9.1 Preparation and Field Sampling of Bitumen Mixture

9.2 Preparing the Marshall Specimen for Bituminous Concrete

9.3 Maximum Density Test

9.4 Density Test

9.5 Quantitative Extraction Test

9.6 Marshall Stability and Flow Value Test

9.7 Slope Flow ValueTest

9.8 Seepage Test

9.9 Uniaxial Compression Test

9.10 Hydraulic Stability Test

9.11 Thermal Stability Test

9.12 Tensile Test

9.13 Bending Test of Small Beam

9.14 Static Triaxial Compressive Test

9.15 Dynamic Triaxial Compressive Test

9.16 Creep Test

9.17 Stress Relaxation Test

9.18 Fatigue Test

9.19 Rheological Test

9.20 Linear Expansion Coefficient

9.21 Specific Heat Test

9.22 Temperature Conductivity Test

9.23 Thermal Conductivity Test

9.24 Freezing Test

9.25 Bonding Tests of Bituminous Concrete and Cement Concrete

9.26 Nondestructive Permeability Test

This Standard is prepared in accordance with the Notice of 2003year's Additional Planning of Professional Standard Establishmentreferred to Document No. 2003-873 issued by General Office of theNational Development and Reform Commission.

As a construction material, bitumen concrete has been widelyused in construction of different hydraulic structures both in Chinaand abroad. The bitumen concrete technology has been welldeveloped through its application in past decades. In China, bitumenconcrete has been used in construction of large-scale hydraulicstructures of many projects, such as the Tianhuangpingpumped-storage project, the Maopingxi earth and rock-fill dam ofThree Gorges Project, the Yele Hydropower Station, the Nierji WaterResources Project and others. With its successful application on theseprojects, rapid progress has been made in bitumen concretetechnology. In order to meet the development of construction ofhydropower and water resources projects and coordinate theimprovement of similar standards in China and abroad, this Standardis prepared through widely seeking comments and referring torelevant domestic and foreign standards. As a result, some relevantcontents applicable to hydraulic bitumen concrete from both domesticand foreign standards have been adopted in this Standard.

Furthermore, attention has been paid to specific features of thehydraulic bitumen concrete.2100433B

本書涵蓋了水工瀝青混凝土的所有知識，以總結已建工程經驗為核心，內容翔實、圖文并茂，與工程實際應用緊密結合。全書共分6篇20章，全面系統地介紹了水工瀝青混凝土的發展應用、瀝青混凝土原材料及加工、水工瀝青混凝土綜合基礎知識、水工瀝青混凝土設計、施工、工程實例及瀝青混凝土專業術語中英文對照等內容。

本書面向廣大的水利工程技術人員及管理人員，可作為水工瀝青混凝土設計、施工、試驗研究等方面技術人員的參考資料；對道路、石化行業的技術人員，也具有參考借鑒作用。

序一

序二

前言

第一篇　概論

第一章　瀝青混凝土的定義

第二章　水工瀝青混凝土分類

第三章　水工瀝青混凝土的發展

第二篇　瀝青混合料

第四章　瀝青材料

第五章　骨料及摻料

第六章　混合料生產

第三篇　瀝青混凝土基礎

第七章　瀝青混凝土的結構強度原理

第八章　瀝青混凝土性能

第九章　瀝青混凝土試驗

第十章　安全監測

第四篇　水工瀝青混凝土設計

第十一章　水工瀝青混凝土配合比設計

第十二章　瀝青混凝土心墻設計

第十三章　水工瀝青混凝土面板設計

第五篇　水工瀝青混凝土施工

第十四章　瀝青混凝土心墻施工

第十五章　水工瀝青混凝土面板施工

第十六章　施工安全與環境保護

第六篇　工程實例

第十七章　三峽工程茅坪溪土石壩

第十八章　天荒坪瀝青混凝土面板

第十九章　挪威STORVATN壩

第二十章　德國RABENLEITE上庫——表面瀝青混凝土襯砌修復

附錄　水工瀝青混凝土名詞中英文對照

參考文獻及參考資料

后記 2100433B

內 容 提 要

本書主要內容：石油瀝膏的技術使質、生產工藝及產品

規格，國內瀝青混凝土防滲墻工程常用的骨料、填料、摻料

及其技術要求；水工瀝青混凝土的配合比設計方法等。書中

對配合比設計方法中存在的問切進行了分析和討論，介紹了

近幾年來我國水工瀝青混凝土配合比口計所取得的進展，并

舉例說明。

本書供從事水工瀝青混凝土防滲墻工程試驗、設計、施

工和科研人員參考，也可供有關專業院校師生參考.