水利水電工程機電設計技術規范內容簡介

《水利水電工程機電設計技術規范(SL511-2011替代SDJ173-85)》由中華人民共和國水利部發布。

1總則

2水力機械

2.1水輪機選擇

2.2水泵選擇

2.3進、出水閥選擇

2.4水輪機控制系統及調節保證

2.5泵站水力過渡過程

2.6主廠房起重機

2.7輸水系統輔助設備

2.8技術供水、排水系統及消防供水

2.9壓縮空氣系統

2.10油系統

2.11水電廠水力監測系統

2.12泵站水力監測系統

3電氣一次

3.1水電廠（站）接入電力系統

3.2電氣主接線

3.3水輪發電機

3.4電動機

3.5主變壓器

3.6高壓配電裝置

3.7廠（站）用電

3.8水閘供電

3.9過電壓保護及接地

3.10照明

3.11電力電纜選型與敷設

4電氣二次

4.1一般規定

4.2廠（站）集中監視控制

4.3 自動控制

4.4勵磁系統

4.5計算機監控系統

4.6繼電保護及系統安全自動裝置

4.7電測量及電能計量

4.8二次接線

4.9廠（站）用直流電源系統

4.10火災自動報警及聯動控制系統

4.11視頻監視系統

4.12在線監測系統

5通信

5.1生產管理通信

5.2調度通信

6機電設備布置及對相關專業的要求

6.1一般要求

6.2主廠房

6.3副廠房

6.4主變壓器

6.5高壓配電裝置

6.6中央控制室

6.7其他用室

6.8發電引水系統

6.9泵站輸水系統

6.10電梯

7輔助設施

7.1機械修配

7.2電氣試驗室

標準用詞說明

條文說明2100433B

1、參與方案評審，對項目機電設計及設備選型提出優化建議。協調相關專業顧問，并跟蹤實施。

2、負責對項目營造、機電安裝及機電設施設備招投標進行督導和跟蹤、巡查。

3、負責機電新技術的引進，包括利用管線綜合、智能化系統、BIM技術、LEED認證等提升酒店品質和延長酒店生命周期。

4、協助制訂酒店項目機電設計及設施標準。

5、參與產品研發工作，評估新產品的機電方案可行性，并提出機電系統改進建議。

6、參與項目后評估，建立技術數據庫。

7、配合相關部門，對開業項目的能耗計算、系統維護和經營管理提供技術支持。

Introduction to English Version

Foreword

1 General Provisions

2 Hydraulic Machinery

2．1 Selection of Turbine

2．2 Selection of Pump

2．3 Selection of Inlet/Outlet Valve

2．4 Control System and Regulation Guarantee of Turbine

2．5 Hydraulic Transition of Pumping Station

2．6 Cranes in Main Powerhouse

2．7 Auxiliary Equipment of the Water Conveyance System

2．8 Technical Water Supply and Drainage System and Fire—fighting Water Supply System

2．9 CompressedAirSystem

2．10 Oil System

2．11 Hydraulic Monitoring System of Hydropower Plant

2．12 Hydraulic Monitoring System of Pumping Station

3 Primary Electric

3．1 Connection of Hydropower Plant/Pumping Station to Power Grid

3．2 Main Electrical Connection

3．3 Hydrogenerator

3．4 Motor

3．5 Main Transformer

3．6 High Voltage Switchgear

3．7 Auxiliary Power System for Hydropower Plant/Pumping Station

3．8 Sluice Power Supply

3．9 Overvoltage Protection and Grounding

3．10 Lighting

3．11 Type Selection and Laying of Power Cable

4 Secondary Electric

4．1 General Requirements

4．2 Plant/station Centralized Supervision and Control

4．3 Automatic Control

4．4 Excitation System

4．5 Supervisory Control and Data Acquisition System （SCADA）

4．6 Relay Protection and System Safety Automatic Devices

4．7 Electrical Measurement and Electrical Energy Measurement

4．8 Electrical Secondary Wiring

4．9 Plant/Station DC Power Supply System

4．10 Automatic Fire Alarm and Fire—fighting Control System

4．11 Video Surveillance System

4．12 On—line Monitoring System

5 Communication

5．1 Production Management Communication

5．2 Dispatching Communication

6 E&M Equipment Arrangement and Requirements for Relevant Specialty

6．1 General Requirements

6．2 Main Powerhouse

6．3 Auxiliary Powerhouse

6．4 Main Transformer

6．5 High Voltage Switchgear

6．6 Central Control Room

6．7 Other Auxiliary Room

6．8 Diversion System in a Hydropower Plant

6．9 Water Conveyance System in Pumping Station

6．10 Elevator

7 Auxiliary Facilities

7．1 Workshop

7．2 Electrical Laboratory

Explanation of Wording

Department of International Cooperation， Science and Technology of Ministry of Water Resources， P. R. China has the mandate of managing the formulation and revision of water technology standards in China.

Translation of this specification from Chinese to English was organized by Department of International Cooperation， Science and Technology of Ministry of Water Resources， P. R. China in accordance with due procedures and regulations applicable in the country.