電路分析基礎（英文版）

chapter 1 circuit variables and circuit elements .

1.1 circuit analysis: an overview

1.2 voltage, current, and the basic circuit elements

1.3 the ideal basic circuit element

1.4 power and energy

1.5 voltage and current sources

1.6 electrical resistance (ohmos law)

1.7 kirchhoffos laws

1.8 analysis of a circuit containing dependent sources

chapter 2 some circuit simplification techniques

2.1 source transformations

2.2 superposition

chapter 3 techniques of circuit analysis

3.1 terminology

3.2 introduction to the node-voltage method

3.3 the node-voltage method and dependent sources

3.4 the node-voltage method: some special cases

3.5 introduction to the mesh-current method

3.6 the mesh-current method and dependent sources

3.7 the mesh-current method: some special cases

.3.8 the node-voltage method versus the mesh-current method

3.9 thvenin and norton equivalents

3.10 more on deriving a thvenin equivalent

3.11 maximum power transfer

chapter 4 the operational amplifier ..

4.1 operational amplifier terminals

4.2 terminal voltages and currents

4.3 the inverting-amplifier circuit

4.4 the summing-amplifier circuit

4.5 the noninverting-amplifier circuit

4.6 the difference-amplifier circuit

4.7 the comparator

chapter 5 the natural and step response of rl and rc circuits

5.1 the inductor

5.2 the capacitor

5.3 series-parallel combinations of inductance and capacitance

5.4 natural response of rl and rc circuits

5.5 step response of rl and rc circuits

5.6 the integrating amplifier

chapter 6 natural and step responses of rlc circuits

6.1 introduction to the natural response of a parallel rlc circuit

6.2 the forms of the natural response of a parallel rlc circuit

6.3 the step response of a parallel rlc circuit

6.4 the natural and step response of a series rlc circuit

chapter 7 sinusoidal steady-state analysis

7.1 the sinusoidal source

7.2 the sinusoidal response

7.3 the phasor

7.4 the passive circuit elements in the frequency domain

7.5 kirchhoffos laws in the frequency domain

7.6 circuit simplifications

7.7 the node-voltage method

7.8 the mesh-current method

7.9 instantaneous, average, and reactive power

7.10 the rms value and power calculations

7.11 complex power and power calculations

chapter 8 balanced three-phase circuits

8.1 balanced three-phase voltages

8.2 three-phase voltage sources

8.3 analysis of the wye-wye circuit

8.4 analysis of the wye-delta circuit

8.5 power calculations in balanced three-phase circuits

8.6 measuring average power in three-phase circuits

chapter 9 introduction to frequency selective circuits

9.1 some preliminaries

9.2 low-pass filters

9.3 high-pass filters

9.4 bandpass filters

9.5 bandreject filters

書由淺入深、系統全面地講解了電子電路及電子系統的基本元件、基本概念、基本分析理論和計算方法，主要內容包括電路基本元件、簡單電阻電路分析、電路常見分析法、運算放大器基本應用電路、一階和二階電路的分析、正弦穩態分析及其功率計算、平衡三相電路、選頻電路及濾波器等。

此外，本書結合多年教學經驗和生活中的實際應用，給出了大量例題和習題、詳盡的圖表資料和豐富的實用電路范例。

2019年，電路分析基礎課程被認定為國家精品在線開放課程；

2020年，電路分析基礎課程被教育部認定為首批“國家級一流本科課程”（線上一流課程）。

《電路分析基礎》以教育部高等學校電子電氣基礎課程教學指導分委員會制定的《電路分析基礎課程教學基本要求》為依據，以培養高素質、創新型電氣、電子信息類高級應用型人才為培養目標，從電專業的人才培養和學生就業最需要的專業基礎知識出發，重點強調“實踐性” “應用性” 和“工程性”，結合現代電路分析基礎的發展趨勢和電類課程教學改革形勢及實際需要編寫而成。

該教材由李麗敏編著，張玉峰教授全面審閱了書稿，并提出了建議，相關教師和學生也提出了反饋意見。在該教材的編寫過程中，編者吸取了參考文獻中一些專家學者的經驗，機械工業出版社編輯也對該教材提供了幫助。

2019年11月21日，該教材由機械工業出版社出版 。

2017年12月26日，電路分析基礎課程被中華人民共和國教育部認定為“國家精品在線開放課程”。