振動工程及其機械技術

《 振動工程及其機械技術:第五屆國際會議論文集(英文版)》 其內容包括孟光教授介紹的旋轉機械系統動力學與控制方面的研究；K.M.Liew教授介紹的有關MEMS和智能系統的動力學研究進展；旋轉機械領域的泰斗、著名空氣動力學、結構動力學和疲勞專家J.S.Rao教授介紹的渦輪葉片疲勞壽命估計方面的研究情況；R.Rzadkowski教授的報告介紹的定子葉片數目對非穩態轉子葉片載荷力的影響；陳文教授的報告介紹的有關軟材料振動聲頻變耗散方面的研究等。

1.Fatipgue life estimation ofturbomachincry blades

2.A survey on frequency-dependent dissipation of soit matter vibration and acoustics

3.The effect of change in the number of stator blades in the stage on unsteady rotor blade forces

4.Nanomechanics for MEMS and smart systems

5.Study on a mechanical semi-active vibration absorber and its control strategy

6.Three-Dimensional seismic analysis and safety evaluation for nuclear pump of nuclear power plant based on the RCC-M Code

7.Natural frequencies of nonlinear transverse vibration of axially moving beams in the supercritical regime

8.A stochastic multi-step transversal linearization method (MTL) in engineering dynamics

9.Rayleigh-ritz method in the study of transverse vibration ofnonhomogeneous orthotropic rectangular plates of uniform thickness resting on winkler foundation

10. Influence of centrifugal stiffening on a rotor system with a flexible diaphragm coupling

11. Dynamic modeling in process control for monitoring the condition of vibrating machinery

12. Active control of flexible vibration systems with inclined combined mounts

13. Crack initiation of rotor blades in the fu'st stage of SO-3 compressor

14. The method of reduction of aerodynamic forces generated in turbine blade seals

15. Dynamic stability and chaos of a space three-bar supporter of shape memory alloys

16. Modal analysis of fractional derivative damping model of frequency-dependent viscoelastic soft matter

17. A discussion on the physics and truth ofnanoscales for vibration ofnanobeams based on nonlocal elastic stress field theory

18. Optimal design of viscoelastic dampers connecting adjacent structures

19. Transformer vibrating characteristics and tank vibration power flow

20. Chaotic field's analysis of simply and clamp supported magneto-elastic thin circular plate

21. Nonlinear dynamic analysis and experimental verification on bolt joint contact structure

22. Analysis on mechanism and simulation research on dynamic characteristics of hydraulic wave exciter device

23. Physical parameter identification of a metal rubber annulus structure based on model updating

24. Research on the random sonic fatigue life estimation of an combustor liner structure

25. Crushing behaviors of lump coal under an impact load

26. Analysis of transverse vibration of rectangular plate with discretely attached point masses having rotary inertia

27. Calculation and analysis of torsional vibration of turbine generator shafts

28. Structural optimization of a wedged-ring joint structure based on response surface design method

29. Analysis on the vibration of needle bar take-up mechanism in high-speed and twin-needle high speed lockstitcher based on multi-body dynamics

30. Monitoring dynamic characteristics for a supertall structure under construction

31. Research on pipeline pressure fluctuation law of hydraulic vibration system controlled by wave exciter

32. Analysis of dynamic response of an embedded railway track subjected to a moving load

33. A hybrid method for interior structural-acoustic analysis

34. The intelligent system design of remote fault diagnosis of reducer based on GA and NN

35. The transverse vibration ofhighline cable of alongside replenishment system

36. Study on dynamic performance of the hydraulic oil

37. Magnetoelectric effect of multiferroic non-uniform composite nanofibers

38. Dynamic response of damaged cable-stayed beam

39. Structural analysis of mop rotor for 1000mw steam turbine based on FSI

40. Force feed effects on process stability in turning

41. Optimisation and performace enhancement of active suspension for automobile under integrated structure-control design

42. Coupled dynamic analysis of deep water floating platforms - a review

43. Damped vibrationbased on mixed layerwise theories for viscoelastic stiffened laminated shells in fluid

44. Sea parameter estimation based on a modal approach

45. Bifurcation and chaos of cross-ply laminated plates with piezoelectric actuators

46. A wave based method for three dimensional steady-state sound radiation analysis in a broad frequency range

47. Stability and vibration signal analysis in hard turning

48. A modified algorithm for random decrement technique

49. Extended abstract free vibration and stability analysis of a spinning annular circular plate

50. Lateral stability, bifurcation and chaos of high-speed railway passenger car system

51. Nonlinear dynamic behaviors ofa thermo-mechanical coupling viscoelastic plate

52. Partial coherence method of transfer functions on structural vibration under correlated excitations

53. Stability limits of high speed milling system considering time-varying stiffness and gyroscopic effects

54. On the non-linear dynamics of a flexible rotor supported on porous oil journal bearings

55. A wave based method for the mid-frequency vibration analysis of coupled long and short wavelength structures

56. Dynamics of slip-ring brush assembly of alternator/motor

57. Numerical analysis of defects in the rotor supporting structure

58. Ansys the variances in dynamic characteristics of the dynamic vibration absorber caused by parameters change

59. Research on characteristics of sound radiation in water from stiffened cylindrical shells excited by interior source: Ⅰ. theory

60. Research on characteristics of sound radiation in water from stiffened cylindrical shells excited by interior source: Ⅱ. examples

61. Seismic response of a rotor-bearing system

62. Research on pressure stabilized controller for 6-DOF hydraulic seisimic simulation table

63. A new method of elimination rigid-body mode of the un-damped linear positive semi-definite vibration system

64. Research on the deflection of the annular throttle slice of shock absorber

65. Dynamics of trod with magnetic coupling

66. Phononic bandgap optimization design based on interactive evolutionary computation

67. The assessment of load bearing capacity of a rigid rrame continuous arch bridge by static and dynamic load test

68. The analysis of static and dynamic responses in spur gear meshing on the basis of finite element simulation and interrelated frictional effect

69. The numerical simulation of supercavitating steady flow past disk cavitator

70. Relationship between structural local damage and dynamic behavior

71. The vibration testing and analysis of the centrifuge facility in a combined vibration and centrifuge environment

72. The design of automatic measurement and calibration system of hard bearing dynamic machine

73. Research on ground-vibration-attenuation effect by SSRF foundation

74. A fast method of fundamental solution for helmholtz equation

75. Optimization of tuned mass damper and seismic effectiveness

76. Dynamic response evaluation of base-isolated cantilever structure

77. Suppression of chatter vibration of boring tools using dampers

78. Newton-harmonic balancing approach for nonlinear free vibration of an lastically-restrained cantilever beam2100433B

單價：48.00元

頁碼：182 頁

出版日期：2009-8-1

出版社：華中科技大學出版社

本書詳細論述了振動工程中廣泛存在的滯遲振動系統及其工程應用。主要內容涉及：具有復雜泛函本構關系的鋼絲繩類滯遲元件的建模、參數辨識；各種滯遲系統在簡諧激勵、隨機激勵和沖擊激勵下的響應計算；鋼絲繩類滯遲元件在減振、緩沖等工程領域的應用等。

《結構振動理論及其應用(精)》內容分為振動基礎理論和工程應用兩部分?；A(chǔ)理論包括單自由度系統、多自由度系統和連續系統的振動，分析方法包括精確解、近似解法和有限元法，還對非線性振動系統的求解作了簡單介紹；工程應用部分包括回轉體振動、工程結構抗震和模態分析技術，最后綜合和應用各部分內容、結合工程實例講述了分析、處理和解決工程結構振動問題的具體方法和步驟。 《結構振動理論及其應用(精)》內容簡明扼要，敘述由淺入深，并附有大量的練習題，可作為土建、水利、機械與工程力學等專業博士研究生的《高等結構力學》和碩士研究生的《振動力學》教材和高年級本科生的選修課教材，也可供與工程振動及其結構動力計算有關的工程技術人員參考。

2100433B