Performance Description
N1: current level of 630A to 1600A, 50KA breaking capacity
N2: current rating 800A to 2500A, 50KA breaking capacity
H1: current rating 800A to 6300A, 65KA breaking capacity
H1b: current rating 800A to 4000A, breaking capacity 85kA
H2: current rating 800A to 6300A, breaking capacity 100KA
H3: current rating 800A to 4000A, breaking capacity 150KA
L1: current rating 800A to 2000A, breaking capacity 150KA
With drawer / fixed, 3 / 4 pole switch
Provide load switch, 1000V, and DC products
Superiority
14 kinds of Micrologic control unit can provide complete protection, and user-friendly maintenance and monitoring, using a variety of optional accessories to meet the changing requirements of modular components that can be assembled on site at any time.
Applications
Five major markets: industrial, energy and infrastructure, public construction business, residential, data centers
Applies to low voltage power distribution in the field of power distribution lines and equipment protection and control:
> N1 - standard for low-level short-circuit breaking current
> N2 - for general short-circuit current
> H1 - suitable for the environment breaking industrial grade short-circuit current
> H1b - breaking capacity requirements applicable to the industrial situation of high
> H2 - high-performance model for the possible very high short-circuit current of heavy industry
> H3 - two transformers in parallel operation of electrical system
> L1 - high limiting capacity for the protection of feed unit or when the transformer rated power to improve the performance to raise the level of switchgear
Masterpact空氣斷路器產品簡介
N1:電流等級630A至1600A,分?jǐn)嗄芰?0KA
N2:電流等級800A至2500A,分?jǐn)嗄芰?0KA
H1:電流等級800A至6300A,分?jǐn)嗄芰?5KA
H1b:電流等級800A至4000A,分?jǐn)嗄芰?5kA
H2:電流等級800A至6300A,分?jǐn)嗄芰?00KA
H3:電流等級800A至4000A,分?jǐn)嗄芰?50KA
L1:電流等級800A至2000A,分?jǐn)嗄芰?50KA
具有抽屜式/固定式,3/4極開關
提供負荷開關、1000V、以及直流產品
十四種Micrologic控制單元可以提供完備的保護,并方便用戶維護與監控,多樣的可選附件可以滿足使用要求的變化,模塊化的組件可隨時在現場完成組裝。
塑殼斷路器電流等級最高2000A 塑殼斷路器能夠自動切斷電流在電流超過跳脫設定后,塑殼指的是用塑料絕緣體來作為裝置的外殼。用來隔離導體之間以及接地金屬部分,塑殼斷路器通常含有熱磁跳脫單元,而大型號的塑...
空氣斷路器 斷路器的一種。絕緣介質為空氣。 空氣開關也就是空氣斷路器,在電路中作接通、分?jǐn)嗪统休d額定工作電流和短路、過載等故障電流,并能在線路和負載發生過載、短路、欠壓等情況下,迅速分?jǐn)嚯娐?..
何必呢?在變頻器的外部端子上加裝一個開關,小開關即可,然后再去更改變頻器參數里面的運轉指令來源,改為:外部端子控制。就可以了!
格式:pdf
大?。?span id="sk75jh1" class="single-tag-height">172KB
頁數: 1頁
評分: 4.4
格式:pdf
大?。?span id="saqmzns" class="single-tag-height">172KB
頁數: 1頁
評分: 4.6
MasterpactMTZ空氣斷路器快問快答
由于出現了結構簡單、滅弧性能良好和電壽命長的六氟化硫斷路器,使得壓縮空氣斷路器的使用范圍縮小。但北歐等一些高寒地區,由于SF6氣體液化和開斷能力降低(降低20%左右)等原因,有些國家在高壓、超高壓電網中還在使用壓縮空氣斷路器。此外,大容量發電機斷路器,要求開斷容量大,動作迅速,還廣泛應用壓縮空氣斷路器。
壓縮空氣斷路器的滅弧室主要由噴口組成。電弧在噴口處燃燒,利用噴口噴出的氣流對電弧的散熱作用來熄滅電?。虼怂且环N外能式滅弧裝置。其滅弧能力主要取決于噴口處氣體的流量與氣流速度。增大壓縮空氣的工作壓力是提高壓縮空氣斷路器開斷能力的最有效措施。隨著工藝技術的提高,壓縮空氣斷路器的工作氣壓不斷提高,早期的工作氣壓多為1~2MPa(即10~20倍標準大氣壓),已普遍采用3~4MPa,個別產品可高達5~6MPa。
ABB Emax 空氣斷路器(固定式和抽出式)均有相同的高度和深度,可安裝在開關柜中,其性能確保操作者的安全。例如:柜門關閉時可搖出斷路器,保護等級達到IP54,此外還帶有安全鎖和雙重絕緣。相與相之間、相與中性線之間完全絕緣,并可對滅弧室與主觸頭進行完整檢查。