自動焊錫機發展現狀

自動焊錫機三度空間全方位調節，使烙鐵和錫線均不需經作業員之手，它完全代替了您的雙手，手臂可以調整至您想要的任意焊接之位，那么自動焊錫機常見的三個原理是什么呢？且聽焊錫機常見創盈時代為你來一一解答。

The automatic tin soldering machine adjusts the three dimensional space to make the solder and tin line do not need the operator's hand. It completely takes the place of your hands. The arm can be adjusted to any position you want. So what are the three principles of the automatic solder machine? Listen to the soldering machine common chuangying times for you to answer.

一、擴散原理：伴隨著潤濕的進行，焊料與母材金屬原子間的相互擴散現象開始發生。通常原子在晶格點陣中處于熱振動狀態，一旦溫度升高。原子活動加劇，使熔化的焊料與母材中的原子相互越過接觸面進入對方的晶格點陣，原子的移動速度與數量決定于加熱的溫度與時間。這個我們可以再焊接過程中清晰的看到，就是錫絲融化后流開的現象。

First, the diffusion principle: with the wetting, the mutual diffusion between the solder and the metal atom of the parent material begins to occur. Usually the atom is in the thermal vibrational state of the lattice lattice, once the temperature rises. The atomic activity intensifies, so that the atoms between melted solder and the parent material cross the contact surface to enter the lattice lattice of the other side. The speed and the number of atoms move depend on the heating temperature and time. The phenomenon that we can see clearly in the process of rewelding is the flow of tin wire after melting.

二、潤濕原理：潤濕過程是指已經熔化了的焊料(錫絲)借助毛細管力沿著母材金屬表面細微的凹凸和結晶的間隙向四周漫流，從而在被焊母材表面形成附著層，使焊料與母材金屬的原子相互接近，達到原子引力起作用的距離。引起潤濕的環境條件：被焊母材的表面必須是清潔的，不能有氧化物或污染物。打個形象的形象比喻就是：把水滴到荷花葉上形成水珠，就是水不能潤濕荷花。把水滴到棉花上，水就滲透到棉花里面去了，就是水能潤濕棉花。

Environmental conditions that cause wetting: the surface of the welded material must be clean, and no oxide or contaminants are available. The image of the image is that the water drops to the lotus leaf to form water, that is, water can not moisten the lotus. The water drops to the cotton, and the water penetrates into the cotton, which is the water that moisten the cotton.

三、冶金結合原理：由于焊料與母材相互擴散，在2種金屬之間形成了一個中間層---金屬化合物，要獲得良好的焊點，被焊母材與焊料之間必須形成金屬化合物，從而使母材達到牢固的冶金結合狀態。這就好比是煉鋼一樣，多種金屬融化后結合在一起。因此可以說我們只有深刻了解了這些原理，我們才能用自動焊錫機來進行很好的焊接的，畢竟自動焊錫機也是模仿人工焊接原理來進行開發的。

Three, metallurgy combination principle: as solder and base metal interdiffusion between the 2 metals in the formation of a middle layer - metal compound, to obtain good solder joint, is welded between the base metal and solder must form a metal compound, so that the base material to achieve a combination of state firm metallurgy. It's like steelmaking, and a variety of metals are melted together. Therefore, we can say that only by understanding these principles, can we use automatic soldering machine to weld well. After all, the automatic solder machine is also developed based on the principle of artificial welding.

多關于焊錫機的小知識請關注焊錫機廠家創盈時代，我們是一家專注于雙Y雙頭焊錫機、雙頭三頭焊錫機、三軸四軸焊錫機、激光焊錫設備整體解決方案的高新技術企業。

原文地址：http://www.chytime.com/news/hxjs/1713.html

本文關鍵字：自動焊錫機原理