固態高頻焊機

實現固態高頻焊機的遠方操作和功率調節，安裝有液晶顯示屏，具有直流調速柜的電樞電壓、勵磁電壓指示和高頻焊機的直流電壓、直流電流指示?？蛇x擇加裝速度——功率閉環控制功能。本操作臺根據配套直流調速柜的類型和數量不同，存在設計差別。

Central Console

The console achieves remote control and power regulation of solid-state H.F. welder, installed with LCD; also it has indicators of armature voltage, field voltage on DC speed regulation cabinet and indicators of DC voltage, DC current on welder. Installation of power-speed closed loop control function is optional. The console has design difference according to different types and quantities of matching DC speed regulation cabinet.

●二維機械調整裝置：適合于感應焊方式，用于逆變輸出柜的安裝與調整，可手動調整感應器位置。

●三維機械調整裝置：適合于感應焊/接觸焊方式，用于逆變輸出柜的安裝與調整，可電動及手動調整感應器位置。

Mechanical Adjusting Equipment

●2-D mechanical adjusting equipment: For induction welding mode, applied with installation and adjustment of inverter output cabinet, the inductor position can be adjusted manually.

●3-D mechanical adjusting equipment: For induction/contact welding mode, applied with installation and adjustment of inverter output cabinet, the inductor position can be adjusted by electric or manual.

●安裝進線刀開關、進線電流表、電壓表（可切換）和進線電壓指示燈。

●安裝三相全控晶閘管整流橋，實現高頻焊機功率調節。

●安裝平波電抗、平波電容及濾波器，以提高平波系數。

Switch Rectifying Cabinet

We integrate the switch gear cabinet part and rectifier part, besides the functions of switch cabinet, this design also has rectifying control functions on solid-state H.F. welders.

● Install incoming disconnect switch，incoming current meter，voltage meter (switchable) and incoming voltage indicator light.

● Install 3-phase full-controllable thyristor rectifying bridge to achieve power regulation of H.F. welders.

● Install flight wave reactor，flight capacitor and filter to increase flight coefficient.

● 逆變部分由MOSFET單相逆變橋并聯組成，單橋功率設計為120kW/60kW，逆變橋采用積木式方式完成功率疊加，每塊橋板均設計為由滑道組成的抽屜式結構，方便安裝與維修；

● 采用匹配變壓器完成功率合成，采用次級諧振、無焊接變壓器輸出方式，由槽路諧振電容器（低壓）與感應器直接諧振，通過輸出極板實現鋼管焊接所需功率的傳遞。

● 采用密封機箱，安裝頂置空調。

Inverter Output Cabinet

● The inverter part is consisted of MOSFET single phase invert bridge in parallel style. Each bridge’s design power is 120 kW/60kW. We adopt building block mode to pile up power, it’s very convenient to install and maintenance because every single bridge board is designed as drawer structure consisted of slideway.

● We adopt matching transformer to realize power combination, also we adopt sub-resonance, no-welding transformer output mode and make resonance directly by tank resonance capacitor (low voltage) and inductor to achieve steel pipe welding power transmission by output lead.

● Use sealed box and install overhead air conditioning.

GPKL-Ⅱ型循環軟水冷卻系統采用閉式冷卻塔結構，冷卻用軟水在密封水箱及冷卻管道中流動，由頂置風機 噴淋水方式冷卻內循環軟水，其工作原理為:利用水蒸發時吸收熱量的原理使被冷卻軟水冷卻。噴淋水貯于冷卻塔底部，軟水在閉式冷卻塔的散熱盤管內進行封閉循環，噴淋水由噴淋系統泵經水分配系統和噴淋嘴噴淋在盤管表面，一部分水被蒸發吸走熱量，從而降低管內軟水的溫度。熱空氣中的水和未蒸發的水被擋水板截住并流經PVC熱交換層，PVC交換層中的水被流過的空氣冷卻，溫度降低，落入冷卻塔底部。

適用范圍：60kW～1200kW感應加熱電源。

Circulation Soft Water Cooling System (air-water cooler)

Model GPKL-Ⅱcirculation soft water cooling system adopts closed cooling tower structure. Cooling soft water flow in sealed water tank and cooling pipes. The inner circulation soft water is cooled by overhead fan and water-spray method using the principle of absorbing heat when evaporation. The spray water store at the bottom of cooling tower, soft water circulate inside the closed cooling tower’s heat dissipation pipe, spray-water spray at pipes’ surface by spray-water distribution system and sprayer through spray system, some heat is taken by dissipation and soft water temperature inside the pipe go down accordingly. The cut board stops water in hot air and undissipated water, make them flow through PVC heat exchange layer, the water in the layer is cooled by air, then temperature goes down and fall down to the bottom of the tower.

Apply range: 60kW～1200kW induction heating power supply.

◆ 固態高頻焊機主要設計指標

Main Design Index of Solid-state H.F. Welder

EFD集團成立于1996年1月，由當時世界上感應加熱領域內的兩大知名感應設備制造商：挪威ELVA公司和德國FDF公司合并而成。1998年，法國主要感應設備制造企業之一的CFEI公司也加盟該集團，由此，EFD集團成了世界上重要的供應感應加熱設備的跨國性股份制集團企業之一?？偛课挥谂餐?

主要產品：感應熱處理設備、工業熱加工系統、便攜式感應加熱設備、高效率固態高頻焊機、

經營范圍：退火、固化粘接、感應釬焊、鍛造、淬火、熔煉、預熱、后熱、矯直校平、回火、高頻焊接、感應加熱等離子產品、

應用領域：汽車行業、航空業、電纜和導線行業、家用設施、冶金和鑄造行業、管材行業